Martin T27 Shaper (Used)

MA ID:

SHM - 5213

Status:

Sold

Price:

$26,500.00

Category:

Manual Single/double Shapers

Manufacturer:

Martin

Model:

T27

Year of Manufacture:

2008

Condition:

Excellent

CLICK HERE TO READ MARTIN'S PRESS RELEASE FOR THIS MACHINE

CLICK HER FOR THE MARTIN T27 BROCHURE

Setting up a tilting shaper can be a major challenge. Not so for the T27 FLEX with its modern touchscreen controller. Thanks to the controllers integrated tool conversion, the operator can make efficient use of the wide tilting range of the T27 FLEX (2 x 46°), allowing them to set up even complex moulding patterns with a tilted spindle in a flash.

No matter whether you work with the spindle tilted to the front or to the back, the controller prompts you in setting up the shaping process. Cutting height, cutting angle everything is structured in an obvious way for the operator. After activating the tool, the controller will indicate the location to reference the tool in relation to the table and fence jaws. In this way, setup procedures that used to be very time-consuming can be performed rapidly a major step in the direction of more flexibility and efficiency for the operator.

Perfect results on six axes

Technical Specifications

Table size 1255 x 900mm ribbed cast iron	Table height 900mm	Table openings 255/205/161/106/74mm
Tools with max diameter 250mm (150mm	for 45 degrees tilt) below table	Rotational speeds 3000/4000/5000/6000/8000/10000rpm
Motor power 10HP	Control panel Foldable, at eye level	Control PowerPC acording to industry Standard
Cutter spindle DormFix quick change system	Spindle stroke 150mm (125mm for 13hp motor)	Tool diameter Max 250mm in fence; 350mm in tenon guard
Extraction 2 x 120mm	Extraction requirement 840cmh	Control properties:
Touch-Screen - user interface 5.7" (145 mm), colour TFT (8-bit colour depth)	Electronically controlled cutting height (spindle), full integration of cutting height in the control and program memory; repetition accuracy of +/- 0.025mm	Electronically controlled cutting angle (spindle), tiltable by + / - 46 degrees, full integration of cutting angle in the control and program memory; repetition accuracy of +/- 0.005mm
Integrated display of fence position cutting depth	Integrated display expandable with following additional controlled axes (maximum 6 axes):	Cutting depth (total fence);
fence jaw, right (chip)	table rings	feeder support height
Easy-to-handle display and intuitive operation of up to five axes on the HOME page	Display and operation of the sixth axis on 2nd page of control	Conversion and digital display of tool position (cutting height/cutting depth) in relation to table and fence based on stored tool data
Tool data memory for 500 tools, 3 reference points can be stored for each tool - simple to enter and use adjustable tools	Program memory for 100 tool positions of all digitally displayed axes	Simple tool and program selection via alphanumeric search function
Fully automated referencing of axes cutting height and cutting angle (T27 FleX)	Controlled and manual movement of the motorised axes possible; if two ore more values exist (i.e. height and depth of a chamfer) all axes can be posititioned directly one after the other.	Selection of the cutters' rotational direction (right/left); status display for standard rotational direction (right)
Display for rotational speed, tool name, spindle rings, and current cutting speed	Integrated calculator with axis-related memory option, integrated operating time counter	Diagnosis and help menu with operating information
Customization possible for all languages using Latin/Cyrillic characters sets	Software key switch / password protection for up to 2 users	USB interface for backup and transfer of program and tool data

Shipping Footprint:

5 (length) x 8 (width) x (height)

Weight:

4000 lbs

All Information including Photos and Videos are supplied by a 3rd party Source.
Please confirm all data before committing to a purchase.
*Subject to credit approval. Additional programs available.