DOTUL DOOR STILE & FLOORING PRESS
| MA ID: | PRC - 14026 |
| Price: | $8,500.00 |
| Category: |
Presses - Cold/Pneumatic/HydroClamps - Frame/Door/Misc |
| Manufacturer: | Dotul Nomad |
| Model: | AT-9602 |
| Year of Manufacture: | 2015 |
| Condition: | Very Good |
|
Dotul Stile Press AT-9602 The platen applies pressure to the outsides of the stile blanks ensuring tight glue lines. Applications include applying veneers to a substrate, or any type of core material including engineered flooring. Maximum opening on the fixed press (AT-9600) is 37 ½” high with a length from 48” to 97” centered. This allows for 34 pieces of 15/16” thick stock to build 1 7/8” thick door stile blanks or 42 pieces of ¾” stock for 1 ½” thick door stile blanks that are 3” to 11 ¾” wide. The press must be filled to within 1-½” from the top of the stack to the bottom of the top platen. Moveable Bottom Platen which is adjusted every 4” up to 20”. The 10’ press has 3 individual platens with 6” travel. Front Loading – Two large gates open wide to let the operator place glued pieces into the press, thus greatly reducing the chances of scraping off adhesive if you had to load from the end. Once loaded the gates are pneumatically locked into place. Side & End Load Stabilizing Arms – Centers stock in the press easily and confidently for more uniform pressure, thus producing a better quality product with much less chance of call backs. Edge Load Pressure – A special feature unique to the Dotul press which puts extra pressure on the sides which produces a superior glue joint. Gear Box/Gear Rack Adjustment – Allows an operator to quickly and easily lower or raise the bottom platen to different heights thus making it more time effective for quick changes and the alignment is always right on versus a modular method. (Adjustable Platen Models Only) AT-9600 pictured Steel Alignment Rods – Slide in and out easily when adjusting the bottom platen, thus eliminating any alignment issues that you would find in a modular unit. • Solid Frame Construction – When placed on concrete or asphalt floors, bolts and nuts used in light framed modular construction have a tendency to flex when under high pressure. Solid frame construction using “I” beams maintains the integrity of the press. Setup and Adhesives – Proper material preparation is important, not just the pressure. When material is prepared properly you do not need 30,000 lbs. of pressure and if you do, you run the risk of squeezing the adhesive out of the parts, starving the joint of glue. Top & Bottom Platens – It is important that the press be very ridged, platens are machined ground and the bottom platen is one piece, especially if long pieces are being glued. This type of design produces a consistent product and glue line. Safety – The air pods are protected with the “I” beam construction, acting as guards to prevent injury and limiting their exposure to outside hazards that could damage them. Unloading – The platens are assisted by three air cylinders that retract the platens, making unloading efficient and easy for the operator. Heavy Duty Construction - will last for decades. |
|
| Shipping Footprint: | 120 (length) x 30 (width) x 72 (height) |
| Weight: | 1900 lbs |
Please confirm all data before committing to a purchase.
*Subject to credit approval. Additional programs available.
Email for More Information
Request a Quote on Freight
Request a Quote on Financing