THERM O WEB LS 62 LAMINATING SYSTEM

THERM O WEB LS 62 LAMINATING SYSTEM

MA ID: LFL - 12657
Price: Call For Price
Category:

Wrap/Foil/Roll

Manufacturer: Therm O Web
Model: LS 62
Year of Manufacture: 2009
Condition: Very Good
Electric: 480 Voltage 60 Cycle 3 Phase
GREAT MACHINE OPTION IN A COMPLETE LINE FOR LAMINATING PANELS. CLEAN MACHINE VERY LITTLE USAGE.

Applications: Face/Laminate material: Rolled stock, paper, melamine, HP Laminate and wall coverings. Substrate: Foam, Particle board, MDF, Plywood, Hardwoods and Fiber board. 

System Operation: Step 1- Operator feeds substrate through glue applicator. Pinch roller disperses the glue web as substrate advances. Once glue has been applied hot knife wire with separate the glue. Step 2- Index laminate manually positioned to adjusting index pin and activates the laminate drive. Step 3- Heat bank substrate passes under the tripple heat bank which activates the glue web. Step 4- Laminate of board as face material and substrate meet and enter pinch roller where the bond is made advancing through the pinch roller together to complete the laminate.

Working dimensions: Maximum Substrate Width: 62";Minimum Substrate Widths: 12"; Maximum Substrate Length: 12' (if using Glue Web cutoff); Minimum Substrate Length: With Carrier: 12";With-Out Carrier: 27" and With Laminate Drive: 54".
Substrate Thickness**: 1/8" - 4";Minimum Laminate Widths: 12";Minimum Laminate Length***: 12" and Feed Rate Per Minute***: up to 40'. Materials must be acclimated to room temperature (no less than 65 degrees) prior to use. Note: ** Additional pinch roller height can be accommodated up to 6"and 
*** Materials under 52" must be fed manually.

Features:

40 FPM
4" Pinch Roller Opening
Triple Heat Banks
Digital Pinch Roller Height Idicator
Heavy 2 1/2" Conveyor Rollers
Temp Control with LED Readout included in PLC Control
Laminate Drive System
Pneumatiac Hot Wire Cutoff System
PLC Touchpad Control
Auto Cool Down
Auto Shut Down
12' Panel Capability
Stainless Steel Trim Finish

Standard Equipment:
4" Height Capacity
Triple Heat Banks
Digital Height Readout
Heavy 2 1/2" Diameter Rollers
Substrate Drive
Glue Web Dispensing System
Digital Heat Readout
PLC Control Panel
Hot Wire Cutoff
Laminate Drive System
Auto Shutdown
Auto Cool Down.

TO INCLUDE: INFEED/OUTFEED 5' CONVEYOR

Machine layout: Length: 26' x Width (base): 6' x Height: 5.5'


Shipping Footprint: 30 (length) x 7 (width) x 9 (height)
All Information including Photos and Videos are supplied by a 3rd party Source.
Please confirm all data before committing to a purchase.
*Subject to credit approval. Additional programs available.